Turbine Lancair IV-P

Our IV-PT project is off the ground! The plane flys great and we are getting ready for final paint. Click any image below for a bigger image. Click your browsers back button to return.

This is the current state of our Turbine Lancair IV-P project. The body work is essentially done. 90% of the bugs in the avionics and systems have been worked out and we are getting ready for taxi tests. The interior is being put together and final bits are being assembled.

Here is a shot of the panel. The hole in the center is for a backup Dynon EFIS. The bottom row of switches on both sides are just waiting for the aluminum inserts to be fabricated. This will greatly clean up the installation of the switches and heater controls.

The cowl will have no visible fasteners when completed. It is held in place using Carbhinge just like a traditional piston engine installation. There are pins running both forward and aft from the exhaust stack opening.

If you have any questions at all regarding this project or any part of it, send e-mail to info.wings "at" innovativewings.com We are more than glad to share our experiences, challenges and solutions.